Recently, someone posted a
question
on the Singletracks forum, asking riders what kind of helmets and body
armor they use when riding. As expected, there were a variety of
answers. Every rider needs some level of protection. After all, a crash
could happen at any time, even on a trail as docile-looking as the one
above, where it’s common to get into the low 20mph range while whizzing
between pine trees.
But how much protection is enough, or too much? When I read the
question I thought about my own experiences over the years, and how I
settled on the body armor I currently use. I want to share what I’ve
learned and experienced in case others are struggling with this
important question.
The early years
As
a new rider, I loved hard shell knee and shin guards for protection
against falls and pedals hitting my shins, but they impaired my
flexibility and were not very comfortable.
When I first started mountain biking, my only source of protection
was a helmet. After a few months of riding, and a couple of falls, I
added gloves to the equation because skinned palms are no fun. Those two
items suited me fine for two or three years. Then, after bouncing my
knees off some roots, I decided I should also wear a pair of knee pads.
This is where I got a little carried away.
I ride cross-country and light trail. There are some roots and rocks
on my local trails, but nothing too extreme. Nevertheless, I chose a
pair of Fox Launch knee/shin guards, which are designed for downhill
riding. What they gave me in protection, they took away in comfort and
flexibility, both of which were important because I was moving around a
lot on my hardtail bike.
My first major crash and the aftermath
This
picture was taken in August of 2015, four months after my crash. It’s
no fun wearing a full-face helmet and goggles in the dead of summer.
In a previous
article,
I mentioned I had a bad crash. After that crash, I decided to increase
the level of body armor I wore, specifically around my face. I bought a
Fox Rampage full-face helmet (also made for downhill riding), and then
some Fox Launch elbow guards.
Looking back, it is clear that I needed these items for psychological
reasons, not for the trails I was riding. It’s rather funny to think
that I wore all of this gear for over a year in Florida, even the summer
months. It made for some very uncomfortable rides.
Yet, I was determined to protect myself from any possible harm that
could occur, naively believing that these items had the power to do so.
Over time, as my confidence returned, and my riding abilities increased,
I stripped away all of this armor and replaced it with gear that was
more appropriate for the trails and climate.
The body armor I use today
This is all the protection I currently use on my rides.
These days, I have settled on a lower level of protection that I feel
is well-suited to my riding style and the trails that I ride on a
regular basis.
My helmet is a
Bell Super 2R, and I use the chin guard in colder weather and for trails with rough descents and drops.
I use Fox Dirtpaw full-finger gloves because I like the added hand protection in case of falls, and because they help with grip.
I use the Dakine Slayer “soft-shell” pull-on knee pads because they
are really comfortable and flexible while still providing adequate
protection in case of falls. They are so lightweight and breathable that
I often forget I am wearing them. In my mind, I have found the right
balance for me between comfort, flexibility, and protection, especially
for the climate in Florida.
Body armor lessons learned
My experiences riding through the years have taught me some lessons
when it comes to body armor. First, there is no body armor that will
prevent all possible harm. That is not the purpose of body armor. Body
armor is designed to reduce and dissipate the forces of impact sustained
in a crash. You hit something hard enough or fast enough, you will get
hurt regardless of what body armor you are wearing. So don’t buy body
armor believing it will make you bullet-proof.
Second, you always need some level of protection when you ride. A
helmet is a given, and should not even be part of the discussion. The
only option with helmets is whether they should be half-shell or
full-face, and that will depend on the rider’s comfort level as well as
the terrain he or she is riding.
Besides a helmet, I highly recommend full-fingered gloves for both
protection and grip. I also suggest investing in a good pair of knee
pads. A broken knee cap is very painful, and has a long recovery period.
Even some lightweight knee pads like mine can make the difference
between a bruise and a broken bone.
Beyond those items, the rest is up to you. Choose body armor that
fits your riding style. If you move around on your bike a lot, make sure
protective gear is comfortable and flexible. Anything that hampers
movement can actually increase the risk of a crash, which defeats the
purpose of wearing protection in the first place.
Third, work on your bike handling skills. They are your first line of
defense in a crash. Knowing how to save a bike that starts to slide off
the trail will prevent you from having to test out the body armor.
Learn how to expertly corner, brake, manual and bunny hop. I have saved
myself from several potential crashes by using these skills. Along with
that, it is also important to keep yourself in good riding shape. Do
core-oriented workouts and balancing exercises, so that you can muscle
your bike out of a jam. You need more than strong legs to mountain bike.
Your whole body needs to be in good shape for you to be a great rider.
Finally, do not choose body armor based on other people’s opinions. I
may have looked really dumb wearing a downhill helmet and goggles on an
XC trail, but I didn’t care. It helped me enjoy riding again after a
bad crash and gave me the comfort level I needed at the time. Don’t
worry what other riders might think of you if you wear more body armor
than they do. Body armor is a personal matter. Only you know what level
of protection you need in order to have confidence on the trails and
enjoy your rides.